Manual Reset Canon MP145 (Waste ink tank full)

Cara mereset printer mp 145 yg full tank /   Waste ink tank full. Tidak perlu menggunakan software untuk meresetnya.

Biasanya di monitor display keluar kode  E 27  atau  E 5 .

Untuk mengatasinya adalah sebagai berikut :

Cara Reset Printer Canon MP145 dan MP160

Step 1 : Push Power switch by continue (Tekan Power On/Off)

Step 2 : insert plug(Masukan Power, Power Tetap di Tekan)

step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda)

Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk merubah 0 ke 1)

Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power –> tombol start sampai ngeprint 1 hal.)

step 6 : Open cover (buka tutup printer)

Step 7 : Unplug (cabut kabel power)

Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41)

Step 9 : Insert plug again (pasang kabel power)

Step 10 : Push power switch (tekan tombol power)

Step 11 : Open cover (scan cover) (buka tutup scaner)

Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41)

berikut ini resep ngereset waste ink counter (error E16 / E27) :

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF

2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x

3. Lepaskan kedua tombol, tunggu sebentar  dan printer akan masuk ke SERVICE MODE

4. Printer akan charging

5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset)

6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye

7. Sesudah itu Matikan printer dengan cara menekan tombol ON/OFF  ( sebanyak 3 kali agar printer mati total ) dan cabut kabel POWER

8. Hidupkan kembali printer.

The number of the Reset : button pressing LED Function Remarks

0 time Green Power off

1 time Orange Service pattern print

2 times Green EEPROM print

3 times Orange EEPROM reset

4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)

6) Turn Off Power. (for MP160)

Berikut tanda Error Code/Kode Error :

E2-2 = No paper (ASF)

E3-3 = Paper jam

E4 = No ink

E5-5 = The ink cartridges are not installed or a non-supported ink       Cartridge is installed, or the ink cartridges are not installed properly

E8 = Waste ink absorber full, or platen waste ink absorber full

E9 = The connected digital camera / video camera does not support Camera Direct Printing

E14 = The Ink cartridges whose destination are wrong

E15 = Ink cartridge is not installed E16 – Ink remaining is unknown

E16 -E19 = Failed to scan head alignment sheet

E22 = Carriage error

E23 = Paper feed error

E24 = Purge unit error

E25 = ASF(cam) sensor error

E26 = Internal temperature rise error

E27 = Waste ink absorber full or platen waste ink absorber full

E28 = Ink cartridge temperature rise error -

E29 = EEPROM error

E33 = Paper feed position error

E35 15 = USB Host VBUD overcurrent error – USB

E37 17 = Abnormal motor driver error

E40 20 = Other hardware error

E42 22 = Scanner error

Selamat mencoba